Category: Kakute H7 v2
Top ViewBottom ViewThe Holybro Kakute H7 v2 Flight Controller is full of features including integrated Bluetooth, HD camera plug, dual plug-and-play 4in1 ESC ports, 9V VTX ON/OFF Pit Switch, barometer, OSD, 6x UARTs, 128MB Flash for Logging, 5V and 9V BEC, and bigger soldering pad with easy layout and much more.The Kakute H7 v2 builds […]
Pinout PinFunctionVTX+9V for HD System or other VTXCan be controlled by VTX ON/OFF Pit Switch (User1)SDA, SCLI2C connection (for peripherals)5v5v output (1.5A max)3v33.3v output (0.25A max)ViVideo input from FPV cameraVoVideo output to video transmitterCAMTo camera OSD controlG or GNDGroundRSIAnalog RSSI (0-3.3v) input from receiverR3, T3UART3 RX and TXR4, T4UART4 RX and TXR6, T6UART6 RX and […]
Kakute H7 v2 ships with Betaflight Firmware.Betaflight Target: KAKUTEH7V2 (BF 4.3.1 or Newer)INAV Target: KAKUTEH7V2 (INAV 5.1 or newer), INAV VTX+ & Bluetooth Setup InformationArdupilot Target: KakuteH7v2 (Ardupilot 4.3 or newer)PX4: KakuteH7V2 (PX4 1.14 or newer)Firmware can be built using make holybro_kakuteh7v2PX4 Bootloader HEX file for KakuteH7 v2:115KBholybro_kakuteh7v2_bootloader.hex
Part 1Part 2
AAHolybro Kakute H7 V2 PINIO Setup for INAV 5.1 This manual applies to INAV 5.1, Holybro Kakute H7 V2 and covers the topic of PINIO functionality setup so that following goals are achieved: Built in Bluetooth is active when INAV is NOT armedBuilt in Bluetooth is disabled when INAV is armedVTX is always enabled or […]