Category: SiK Telemetry Radio V3

Telemetry Radio Setup You can use multiple Point to Point telemetry modules with the Holybro SiK Telemetry Radio V3. Sample Wiring Diagram Note that the above Diagram shows RTK connection, but the telemetry connections apply to normal GPS as well. Flight Controller setup Mission Planner Configuration Telemetry Radio V3 configuration: Set a different Net ID […]

Many countries have different legal RF power ratings. Be sure to operate within the legal limits. Holybro SiK 1W Telemetry Radio default RF power is set to 21 dBm. Change the Tx Power based on your needs and the regulation limits. Under the Tx Power drop-down menu, there are 21 power levels. But for SIK […]

Mission Planner Configuration Telemetry Radio V3 configuration:Set a different Net ID for each pair of Telemetry Radio V3, as shown belowConnect all telemetry modules to the computer via a USB hub.Open Mission Planner to locate the base, then connect it withthe flight controllers. Select AUTO connecting as shown below. All recognized flight controllers on the […]

100mW & 500mW Version LED Indicators Status The radios have 2 status LEDs, one red and one green. Green LED blinking – searching for another radio Green LED solid – link is established with another radio Red LED flashing – transmitting data Red LED solid – in firmware update mode Connecting to Pixhawk Standard Flight […]