About The Author
pixhawk
Other Posts by This Author
XBP9X Radio Status LEDs
pixhawkJuly 11, 20250 Comments
Status LEDs The radios have 6 status LEDs, there blue, two orange and one green. The meaning of…
XBP9X Radio Specification
pixhawkJuly 11, 20250 Comments
Product Specification FREQUENCY RANGEISM 902 to 928 MHzTRANSMIT POWER (Software Selectable)Up to 30 dBm*CHANNELS10 hopping sequences share 50…
XBP9X Radio Power
pixhawkJuly 11, 20250 Comments
Supply voltage 5V DC from USB or 6-position JST-GH (100mW) 7~35V DC form 4-position JST-GH (500mW or 1000mW)…
XBP9X Radio Point-to-Multipoint Setup with XBee Radio
pixhawkJuly 11, 20250 Comments
Holybro XBP9X Radio Point-to-Multipoint setup: Use the XCTU configuration software to set the CM, HP, ID, MT, BR…
XBP9X Radio Pinout
pixhawkJuly 11, 20250 Comments
Data Port PinSignalVolt1(red)NC—2(black)RX+3.3V3(black)TX+3.3V4(black)CTS+3.3V5(black)RTS+3.3V6(black)GNDGND Power Port PinSignalVolt1(red)BAT+7-35V2(red)BAT+7-35V3(black)BAT-GND4(black)BAT-GND
XBP9X Radio Download
pixhawkJuly 11, 20250 Comments
XCTUDigi XBee SX 900 RF Module4MBXBee-Radio-Case.stp
XBP9X Radio Antenna
pixhawkJuly 11, 20250 Comments
SpecificationsQT900LFrequency range902锝?28 MHzBand Width26 MHzPolarizationverticalGain3 dBiInput impedance50惟SWR鈮?.5Maximum power20WConnectorRPSMA (female)Total length19.6 cm (foldable antenna)Weight40g
Related Posts
H-RTK Unicore UM982 Advanced Application (Unicore Uprecise)
pixhawkJuly 11, 20250 Comments
WARNING: Changing the GPS configuration can render it inoperable for normal Moving Baseline GPS operation and require resetting…
H-RTK Unicore UM982 Dimension
pixhawkJuly 11, 20250 Comments
Standard H-RTK UM982H-RTK UM982 Ultralight
H-RTK Unicore UM982 Download
pixhawkJuly 11, 20250 Comments
H-RTK Unicore UM982 CAD File 6MBH-RTK-Unicore-UM982-CAD.stpCase 3D CAD109KBHX-CH6601A-asm.stpAntenna 3D CAD Unicore UPrecise 54MBUPrecise-V2.0.786.ziparchive60MBUPrecise-V2.0.1037.ziparchive2MBUnicore Reference Commands Manual For N4…
H-RTK Unicore UM982 Factory Setting and COM Port Allocation
pixhawkJuly 11, 20250 Comments
Resetting to Holybro Factory Configuration Using Uprecise, type the following commands, followed by ENTER on your keyboard, into…
H-RTK Unicore UM982 Firmware Support
pixhawkJuly 11, 20250 Comments
PX4 Supported in Main FW or 1.14 and later. Ardupilot Supported in Master FW or 4.4 and later.
H-RTK Unicore UM982 LED Indicator
pixhawkJuly 11, 20250 Comments
Indicator LED Meaning PWR – Power has been appliedERROR – Failure of GPS’s startup self test3DFix – GPS…
H-RTK Unicore UM982 Overview
pixhawkJuly 11, 20250 Comments
The Holybro UM982 Dual Antenna RTK GPS provides high-precision positioning information and is capable of generating non-magnetometer moving…
H-RTK Unicore UM982 Setup & Getting Started (Ardupilot)
pixhawkJuly 11, 20250 Comments
Connection to Autopilot Standard UM982 Various JST-GH cables are provided to attach to the UM982 10 pin JST-GH…
Leave a Reply