M8N/M9N/M10 GPS Standard M10/M9N/M8N GPS Pinout
Stanard (JST GHR1.25mm 10pin cable):This JST GH 10Pin connector can be use d on Pixhawk Series 10pin鈥淕PS Module or "GPS1"…
H-RTK ZED-F9P Series (RM3100 Compass) Setup & Getting Started (PX4)
Getting started In this section of the manual, we will cover the basic setup of the units. To setup the…
H-RTK ZED-F9P Series (RM3100 Compass) Setup guide for Multiple Aircraft
Multiple Point to Point Setup with Sik RadioPoint-to-Multipoint Setup with Microhard Radio
H-RTK ZED-F9P Series (RM3100 Compass) Setup & Getting Started (Ardupilot)
Getting started In this section of the manual, we will cover the basic setup of the units. To setup the…
H-RTK ZED-F9P Series (RM3100 Compass) Portable RTK Base Station Setup
Introduction This is a portable solution that sends the RTK corrections via a Sik Telemetry Radio link directly to the…
H-RTK ZED-F9P Series (RM3100 Compass) Pinout
UART 10 Pin VersionUART 6 Pin VersionDroneCAN 4 Pin Version UART 10 Pin GPS Port PinSignalVoltage1(red)VCCPower +5V2RX(in)TTL 3.3V3TX(out)TTL 3.3V4SCL1TTL 3.3V5SDA1TTL…
H-RTK ZED-F9P Series (RM3100 Compass) Overview
The H-RTK ZED-F9P Rover features the u-blox ZED-F9P GNSS receiver, RM3100 Compass, and a tri-colored LED indicator, providing precise positioning…
H-RTK ZED-F9P Series (RM3100 Compass) GPS Heading/Yaw (aka Moving Baseline)
PX4 Guide for RTK PX4 FirmwareGPS Heading with Dual u-blox F9P is supported in the both DroneCAN and UART version….
H-RTK ZED-F9P Series (RM3100 Compass) Galileo OSNMA Support
AAWith the newest firmware released by u-blox (v1.5x), all u-blox ZED-F9P now support the Galileo OSNMA feature.Firmware version 1.51 can…
H-RTK ZED-F9P Series (RM3100 Compass) DroneCAN FW Upgrade
For U-blox Firmware Upgrade, please see here. As of September 1, 2024, the Holybro AP-Periph DroneCAN stable firmware does not…