H-RTK ZED-F9P Series (IST8310/BMM150 Compass) Standard F9P (UART) H-RTK with Cube Autopilot

AAThe Standard H-RTK F9P GPS can be used with Cube Autopilot by connecting to GPS 2 port.If using Ardupilot with The Cube, set Serial3_Protocol to -1 so that Ardupilot will read GPS2 port for GPS data if there is nothing connected on the GPS1 port.

Note: GPS2 port on both Pixhawk & Cube does not support Safety Switch function. You can use an external safety switch or disable the safety switch on ground control station application.