Category: Flight Controller

Pixhawk 6C Sample Wiring Diagram

Dimension in millimeters

Pixhawk 6C & Pix32 v6 shares the same System Diagram & Pinout

PX4 Autopilot If you are using PX4 Autopilot, please refer to the PX4 user guide page for additional information. https://docs.px4.io/main/en/flight_controller/pixhawk6c.html https://docs.px4.io/main/en/assembly/quick_start_pixhawk6c.html Ardupilot If you are using PX4 Autopilot, please refer to the PX4 user guide page for additional information. https://ardupilot.org/copter/docs/common-holybro-pixhawk6C.html

The newest batch (version RC09) of Pixhawk 6C now supports switchable PWM signal voltage (3.3V or 5V). The modification requires the user to open the casing of the Pixhawk flight controller and be familiar with soldering. Any damages caused during the modification are not covered by warranty To switch the PWM signal voltage, bridge the […]

Pixhawk 6C ships with PX4 FMUv6C Firmware PX4 Pixhawk 6C is supported on PX4 1.13.1 release and later. Ardupilot Pixhawk 6C is supported in Ardupilot 4.2.3 stable release and later. Firmware can be flash via Mission Planner or QGroundControl. It can also be downloaded here: https://firmware.ardupilot.org/ QGroundControl Must use QGC v4.2.4 or later, or Daily […]

Pixhawk 6C Case CAD 3D File PWM Adapter 3D File