Other Posts
Ardupilot IST8310 Compass Orientation For any Holybro GPS Module with IST8310 compass, if you are unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.
PX4 Guide for RTK PX4 FirmwareGPS Heading with Dual u-blox F9P is supported in the both DroneCAN and UART version. The DroneCAN version requires a different firmware and can be found in the guide below.RTK GPS Heading with Dual u-blox F9P | PX4 User GuideRTK GPS | PX4 User GuideHolybro H-RTK ZED-F9P RTK Rover (DroneCAN […]
Multiple Point to Point Setup with Sik RadioPoint-to-Multipoint Setup with Microhard Radio
The Firmware upgrade process is the same as the ZED-F9P, please refer to the link below.u-blox F9P Firmware UpgradeDroneCAN FW Upgrade
Ardupilot IST8310 Compass Orientation For any Holybro GPS Module with IST8310 compass, if you are unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.
PX4 Guide for RTK PX4 FirmwareGPS Heading with Dual u-blox F9P is supported in the both DroneCAN and UART version. The DroneCAN version requires a different firmware and can be found in the guide below.RTK GPS Heading with Dual u-blox F9P | PX4 User GuideRTK GPS | PX4 User GuideHolybro H-RTK ZED-F9P RTK Rover (DroneCAN […]
Multiple Point to Point Setup with Sik RadioPoint-to-Multipoint Setup with Microhard Radio
The Firmware upgrade process is the same as the ZED-F9P, please refer to the link below.u-blox F9P Firmware UpgradeDroneCAN FW Upgrade