Categories
H-RTK ZED-F9P Series (IST8310/BMM150 Compass) Standard F9P (UART) Dimension
Dimension in Millimeter
H-RTK F9P Rover lite(SKU12017) & H-RTK F9P Rover lite 2nd GPS(SKU12025)
Current Version
Previous Version
Other Posts
Standard H-RTK F9P Rover STP Files 280KBF9P-roverlite-pcba.stp3MBF9P-roverlite_asm.stp Standard H-RTK F9P Helical STP Files 4MBrtk-f9p-helical-pcba.stp856KBrtk-f9p-helical-3D-simple.stp109KBHX-CH6601A-asm.stpAntenna 3D CAD Standard H-RTK F9P Base STP Files 8MBh-rtk-f9p-base.stp Standard H-RTK F9P Ultralight STP File 462KBF9P_Ultralight.step
AAThe board itself is the same as F9P Helical, but it is equipped with a much better high-gain antenna. This model is best suited to use as base station. The search speed and positioning accuracy are the highest among the three models.H-RTK F9P Base (SKU12022)H-RTK F9P Base with Antenna Detached
AAThis model uses a helical antenna, which has better performance than the Rover lite version. This model can be used both on rover (aircraft) or as base station. The aluminum alloy shell design also has a integrated safety switch and a tri-colored LED indicator, and it is compatible with the open source Pixhawk series flight […]
H-RTK F9P Rover Lite There are two version available. Standard version comes with 10 Pin connector for Pixhawk GPS1 port. (Connector not compatible with CubePilot)2nd GPS version comes with 8 pin connector for Pixhawk GPS2 Port or GPS2 Port on the CubePilotThis model is low profile, lower cost, and has high performance, It can meet […]
AAThe Standard H-RTK F9P GPS can be used with Cube Autopilot by connecting to GPS 2 port.If using Ardupilot with The Cube, set Serial3_Protocol to -1 so that Ardupilot will read GPS2 port for GPS data if there is nothing connected on the GPS1 port. Note: GPS2 port on both Pixhawk & Cube does not […]
Standard H-RTK F9P Rover STP Files 280KBF9P-roverlite-pcba.stp3MBF9P-roverlite_asm.stp Standard H-RTK F9P Helical STP Files 4MBrtk-f9p-helical-pcba.stp856KBrtk-f9p-helical-3D-simple.stp109KBHX-CH6601A-asm.stpAntenna 3D CAD Standard H-RTK F9P Base STP Files 8MBh-rtk-f9p-base.stp Standard H-RTK F9P Ultralight STP File 462KBF9P_Ultralight.step
AAThe board itself is the same as F9P Helical, but it is equipped with a much better high-gain antenna. This model is best suited to use as base station. The search speed and positioning accuracy are the highest among the three models.H-RTK F9P Base (SKU12022)H-RTK F9P Base with Antenna Detached
AAThis model uses a helical antenna, which has better performance than the Rover lite version. This model can be used both on rover (aircraft) or as base station. The aluminum alloy shell design also has a integrated safety switch and a tri-colored LED indicator, and it is compatible with the open source Pixhawk series flight […]
H-RTK F9P Rover Lite There are two version available. Standard version comes with 10 Pin connector for Pixhawk GPS1 port. (Connector not compatible with CubePilot)2nd GPS version comes with 8 pin connector for Pixhawk GPS2 Port or GPS2 Port on the CubePilotThis model is low profile, lower cost, and has high performance, It can meet […]
AAThe Standard H-RTK F9P GPS can be used with Cube Autopilot by connecting to GPS 2 port.If using Ardupilot with The Cube, set Serial3_Protocol to -1 so that Ardupilot will read GPS2 port for GPS data if there is nothing connected on the GPS1 port. Note: GPS2 port on both Pixhawk & Cube does not […]