H-RTK ZED-F9P Series (RM3100 Compass) DroneCAN FW Upgrade

For U-blox Firmware Upgrade, please see here.

As of September 1, 2024, the Holybro AP-Periph DroneCAN stable firmware does not support the IST8310 and RM3100 sensors. However, support is available in the latest (master) firmware and will be included in the upcoming stable release.
You can download the latest firmware here: HolybroG4_GPS Latest Firmware.
If you are working with a custom firmware, you can refer to the following pull request for the necessary code changes: ArduPilot Pull Request #27878.

DroneCAN MCU Firmware Upgrade

Please use Mission Planner 1.3.74 or higher.Close the parameter setting page, click 鈥淢enu>Update to check available updates. Update the DroneCAN MCU firmware.After clicking 鈥淯pdate it will ask whether to search for updates from the Internet. Click 鈥淵es (Automatically searches for upgrades to the latest stable version firmware).

If 鈥淣o update available appears when searching updates. You can try to turn off your firewall in the system setting and try again.

Alternatively, If you have already downloaded the firmware on your local computer from ArduPilot Firmware (name of firmware folder is 鈥淗olybroG4-GPS , and file to download is 鈥淎P_Periph.bin , Click 鈥淣o and you will be presented with a selection dialog box and then select the firmware file from your local drive.

After the upgrade, check whether the version is successfully upgraded.