Categories
H-RTK ZED-F9P Series (RM3100 Compass)

H-RTK ZED-F9P Series (RM3100 Compass) Specification

Options

Product Model



SKU
SKU12054
SKU12058
SKU12059
Connector Type
GH1.25 10-Pin cable
GH1.25 6-Pin cable
GH1.25 4-Pin cable
Applicable Ports
Holybro GPS1 Port
Holybro or CubepilotGPS2 Port
Flight Controller CAN Port
Communication Protocol
UART
UART
DroneCAN
MCU IMU Barometer
N/A
N/A
STM32G4
ICM42688
ICP20100
*Pending support

Specification

Application
Rover (Aircraft, Ground Vehicle, Marine Vehicle, etc)
GNSS Receiver
U-blox ZED-F9P High Precision GNSS Receiver
GNSS Band
GPS: L1C/A and L2CGLONASS: L1OF and L2OFGalileo: E1-B/C and E5bBeiDou: B1I and B2IQZSS: L1C/A and L2C
Number of concurrent GNSS
4
Magnetometer
RM3100 Industrial Grade Compass
Heading accuracy
0.4 degrees
Positioning Accuracy
Horizontal & Vertical: RTK 0.01m +1ppm CEP
Antenna
Dual-Band Stacked Ceramic Patch Antenna (47.5 x 47.5 x 4mm)20.5卤1dB LNA Gain (typical)
Antennas Peak Gain (MAX)
L1: 4.0dBi L2:1.0 dBi
Acquisition
Hot Start: 2sAided starts: 2sCold starts: 25s
Data and Update Rate
RAW: 20Hz Max RTK: 8Hz MaxMoving Base RTK: 5Hz Max
Maximum altitude
80,000 m
Maximum speed
500 m/s
Sensitivity
Tracking & Navigation: 67 dBmCold starts: 48 dBmHot starts: 57 dBmReacquisition: 60 dBm
Timepulse
Configurable from 0.25hz to 10mhz
Protocols
NMEA銆乁BX binary銆丷TCM 3.3
Filtering & Amplication
Triple SAW + LNA Filtering for Precise Signal Filtering & Signal Amplification Double Hybrid Coupler for Efficient Signal Coupling
Anti-jamming
Active CW detection and removalOnboard band pass filter
Anti-spoofing
Advanced anti-spoofing algorithms
Cable Length
40cm
Baud rate:
115200 5Hz (default) can be set
Working Temperature
-40 掳C to +85 掳C
Working voltage:
4.75V~5.25V
Current Consumption
~250mA
Dimensions
Diameter: 78mm Height: 22mm
IP Rating
IPX6
Weight
117g

Leave a Reply

Your email address will not be published. Required fields are marked *


Other Posts

Categories
H-RTK ZED-F9P Series (RM3100 Compass)

H-RTK ZED-F9P Series (RM3100 Compass) Changelog

H-RTK ZED-F9P Rover (UART or DroneCAN)H-RTK F9P Rover (UART)DroneCAN H-RTK F9P Rover(DroneCAN) The H-RTK ZED-F9P Rover is the latest update to the original H-RTK F9P Rover & DroneCAN H-RTK F9P Rover models. Change Log Changed Magnetometer from iSentek IST8310 to a higher-grade PNI RM3100 Improved water & dust resistance for challenging environments Improved EMI shielding […]




Categories
H-RTK ZED-F9P Series (RM3100 Compass)

H-RTK ZED-F9P Series (RM3100 Compass) DroneCAN FW Upgrade

For U-blox Firmware Upgrade, please see here. As of September 1, 2024, the Holybro AP-Periph DroneCAN stable firmware does not support the IST8310 and RM3100 sensors. However, support is available in the latest (master) firmware and will be included in the upcoming stable release.You can download the latest firmware here: HolybroG4_GPS Latest Firmware.If you are […]


Categories
H-RTK ZED-F9P Series (RM3100 Compass)

H-RTK ZED-F9P Series (RM3100 Compass) Galileo OSNMA Support

AAWith the newest firmware released by u-blox (v1.5x), all u-blox ZED-F9P now support the Galileo OSNMA feature.Firmware version 1.51 can be downloaded from the link below, for the latest firmware please visit u-blox's official website.https://content.u-blox.com/sites/default/files/2024-11/UBX_F9_100_HPG151_ZED_F9P.6c43b30ccfed539322eccedfb96ad933.binDirect Download linkFor tutorials on how to update u-blox firmware on the H-RTKu-blox F9P Firmware UpgradeOSNMA cryptographic keys are not installed […]